PRE-RIDING INSPECTION

Prior to starting your motorcycle, it is advised that you inspect the cycle as a matter of habit to make sure that it is in good, safe riding condition. This inspection will only require a few minutes and can save you much time and expense in the long run.

Check the following items and if adjustment or servicing is necessary, refer to the appropriate section in the manual.

1. Engine oil level add engine oil if it is below the lower level mark on dipstick .
2. Fuel level fill gasoline tank when quantity is not enough for travel .
3. Front and rear brakes adjust free play in the front brake lever and brake pedal if it is incorrect.
4. Tire air pressure inflate tires if pressure is too low.
5. Drive chain adjust chain tension when it is too loose.
6. Throttle operation repair if it is not smooth.
7. Turn signal light, tail/stoplight and headlight repair when the signal lights do not light properly.


HOME     CB 450 K5 information    CB 450 K5 Manual: Table of Contents