Suspensions

Front Suspension Inspection

Check the front fork assembly by locking the front brake and pumping the fork up and down vigorously.

Inspect for smooth cushion action and oil seepage around the cushion oil seals.

Carefully inspect all front suspension fasteners for tightness, this includes the attachment points of the fork tubes, brake components and handle bar.

Front Fork Oil Change

To maintain good riding characteristics and increase fork service life, the oil in the front fork should be changed periodically.

  1. Unscrew the front fork drain plug (1) at the bottom of fork cylinder. Drain the oil by pumping the fork while the plug is out. Replace the plug securely after draining.
  2. Remove the top filler plug (2) and fill each front fork cylinder with 5.3-5.6ozs.(155-165cc) of premium quality ATF. Securely tighten the top filler plug after filling.

    

Rear Suspension Inspection

Check the rear suspension periodically by careful visual examination. Check the rear suspension by pushing hard against the side of the rear wheel while the motorcycle is on the main stand and feel for looseness of the fork bushings. If excessive looseness is felt, consult your HONDA dealer for further inspection. Check all suspension component attachment points for security of their respective fasteners.

Rear Fork Bushing:

It is recommended that lubrication be performed every 3,OOO miles (5,000 km) or 6 months, whichever occurs first, with multipurpose grease, type NLGI No. 2.

HOME     CB 450 K5 information    CB 450 K5 Manual: Table of Contents